Aluminum alloy quenching furnace, aluminum alloy solution quenching furnace, aluminum casting solution furnace and aluminum products quenching furnace are mainly used for rapid solution quenching of aluminum castings, aluminum tubes, aluminum bars and various aluminum alloy standard parts. The aluminum alloy solid solution quenching furnace is mainly composed of heating furnace body, vertical support, lifting mechanism, charging trolley, mobile quenching water tank and quenching frame, temperature action control and other parts. After the constant temperature time, the water transfer speed of the workpiece is completed within 10 seconds.

 

1. The furnace body is cylindrical, which changes the former square structure to achieve no dead angle of air circulation and improves the temperature uniformity.

 

2. Furnace lining: it is composed of two parts. The furnace body is made of super light energy-saving brick and aluminum silicate fiberboard. The top part of the furnace is movable, and the high-quality aluminum silicate needle felt is used as the thermal insulation material. The structure design is reasonable, with good thermal insulation performance, low temperature rise of furnace wall, energy saving and consumption reduction.

 

3. Circulation device: to make the temperature uniformity in the furnace meet the requirements of quenching process, a strong centrifugal fan is set on the top of the furnace body, and the centrifugal fan is set on the top of the furnace body

 

Under the function of the guide system in the furnace, the hot gas flow can be effectively circulated.

 

Lifting: the hoisting winch is set outside the furnace to complete the lifting. When the furnace door is opened, the winch will automatically and rapidly descend, and the material rack with full load of workpiece will be quickly put into water for quenching.

 

4. Drive the furnace door; the connecting rod mechanism quickly lifts the furnace door from the slide rail, presses it onto the furnace and seals it. When the furnace is discharged, the furnace door falls from the furnace mouth to the slide rail and returns to the outside of the furnace mouth, so that the workpiece can be quickly put into the groove from the furnace for quenching.

 

5. Quenching tank; the quenching tank is mobile or fixed. The quench tank can be made according to the requirements of installation and use, with driving mechanism, heating system and quenching medium circulating cooling device.